• Full Steel Structure Lab Chemical Fume Hood Cupboard
  • Full Steel Structure Lab Chemical Fume Hood Cupboard
  • Full Steel Structure Lab Chemical Fume Hood Cupboard
  • Full Steel Structure Lab Chemical Fume Hood Cupboard
  • Full Steel Structure Lab Chemical Fume Hood Cupboard
  • Full Steel Structure Lab Chemical Fume Hood Cupboard

Full Steel Structure Lab Chemical Fume Hood Cupboard

Material: Painted Steel
Type: Bypass Type
Function: Exhaust, Velocity Control, for Chemical Experiments
Feature: Corrosion Resistance, Heat Resistant, Acid & Alkali Resistant, Fireproof, Explosion Proof
Hood Type: Standard
Color: Optional

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
PW-2018-PWTF
Customized
Customized
Condition
New
Other Type
Walk-in Fume Hood
Worktop
Phenolic Resin, Epoxy Resin, Ceramic etc
Other Material
PP, FRP, Stainless Steel etc
Transport Package
Bubble Film+Hard Cotton+Wooden Package
Specification
1200/1500/1800*850*2350mm
Trademark
PENWAY
Origin
China
HS Code
940320000
Production Capacity
1000 Sets / Year

Product Description

Full Steel Structure Lab Chemical Fume Hood Cupboard
 

A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height.Two main types exist, ducted and recirculating (ductless). The principle is the same for both types: air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room. This is used to:

*Protect the user from inhaling toxic gases (fume hoods, biosafety cabinets, glove boxes)
*Protect the product or experiment (biosafety cabinets, glove boxes)
*Protect the environment (recirculating fume hoods, certain biosafety cabinets, and any other type when fitted with appropriate filters in the exhaust airstream)

Worktop: Phenolic Resin
Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical stain and corrosion.  Non-porous and non-conductive, it's strong durable qualities enable it to withstand high impact and shock.  It is easily cleaned with soap and warm water.

 

Constant air volume principle
Conventional hood: This term is used to describe a constant air volume (CAV) hood, an older, traditinally less elaborate hood design used for general protection of the laboratory worker. Because the amount elaborate hood design used for general protection of the laboratory worker. Because the amount of exhausted air is constant, the face velocity of a CAV hood is inversely proportional to the sash height. That is, the lower the sash, the higher the face velocity. CAV hoods can be installed with or without a bypass provision which is an additional opening for air supply into the hood.

 

Cold-Rolled Steel (Painted) benchtop fume hoods
Type  Benchtop fume hoods
Exhaust system CAV exhaust system (Constant air volume)
Exhaust fan Inclined flow fan (The installation principle is the same as air conditioning)
Exhaust air rate 1500-3500m3/h
Ventilation ducts PVC material, FPR, PP or other
Power (Single-phase) 220V/50HZ or (Three-phase) 380V/50HZ
Air valve Manual or electric
Average wind speed 0.3-0.6m/s adjustalbe
Noise level < 60dB(A)
Tops 12.7/16/19/mm thickness of Phenolic resin (Other: Epoxy resin, Ceramic etc)
Inner Liner Using HPL physiochemical board to make for lining plate and the flow guide plate

Cabinet

1.0mm thick cold-rolled steel with 75μm epoxy resin powder coating, most chemical resistant

Size

1200/1500/1800*850*2350 mm

Visual windows

Transparent tempered glass, explosion-proof (manual)

Opening height 20-700 mm

Control panel

Touch, intelligent control panel (can control lights, sockets, exhaust fan etc)

Gross weight  280-400 kg
Motor power 0.5-1.1KW
Luminance >300LX
Accessories Pegboard, sink, faucet, gas fitting, sockets, lab stools etc

Full Steel Structure Lab Chemical Fume Hood Cupboard
Full Steel Structure Lab Chemical Fume Hood Cupboard
Full Steel Structure Lab Chemical Fume Hood Cupboard
Full Steel Structure Lab Chemical Fume Hood Cupboard

Send your message to this supplier

*From:
*To:
avatar Mr. Frank Wei
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now