Benchtop Lab Fume Cupboard Hood Specification Cupboard Work

Product Description

Benchtop Fume Cupboard Hood Specification Cupboard Work
 

Ventilation cabinet (fume hood) is an important part of the laboratory equipment, it is a kind of effective local ventilation. Ventilation cabinet can make experiment operator and laboratory other workers away from the toxic gases, chemical reagents in the laboratory environment infringement, in ensuring the safety of the lab environment and overall functional play a vital role.

 

A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height.Two main types exist, ducted and recirculating (ductless). The principle is the same for both types: air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room. This is used to:

*Protect the user from inhaling toxic gases (fume hoods, biosafety cabinets, glove boxes)
*Protect the product or experiment (biosafety cabinets, glove boxes)
*Protect the environment (recirculating fume hoods, certain biosafety cabinets, and any other type when fitted with appropriate filters in the exhaust airstream)

Worktop: Phenolic Resin
Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical stain and corrosion.  Non-porous and non-conductive, it's strong durable qualities enable it to withstand high impact and shock.  It is easily cleaned with soap and warm water.
 

Cold-Rolled Steel (Painted) benchtop fume hoods

Type	Benchtop fume hoods
Exhaust system	CAV exhaust system (Constant air volume)
Exhaust fan	Inclined flow fan (The installation principle is the same as air conditioning)
Exhaust air rate	1500-3500m3/h
Ventilation ducts	PVC material, FPR, PP or other
Power	(Single-phase) 220V/50HZ or (Three-phase) 380V/50HZ
Air valve	Manual or electric
Average wind speed	0.3-0.6m/s adjustalbe
Noise level	< 60dB(A)
Tops	12.7/16/19/mm thickness of Phenolic resin (Other: Epoxy resin, Ceramic etc)
Inner Liner	Using HPL physiochemical board to make for lining plate and the flow guide plate
Cabinet	1.0mm thick cold-rolled steel with 75μm epoxy resin powder coating, most chemical resistant
Size	1200/1500/1800*850*2350 mm
Visual windows	Transparent tempered glass, explosion-proof (manual)
Opening height	20-700 mm
Control panel	Touch, intelligent control panel (can control lights, sockets, exhaust fan etc)
Gross weight	280-400 kg
Motor power	0.5-1.1KW
Luminance	>300LX
Accessories	Pegboard, sink, faucet, gas fitting, sockets, lab stools etc