Energy Saving Chemical Resistant Laboratory Fume Hood with Vertical Sash

Product Description

Energy saving chemical resistant fume hood with CE certificate.

Product Description

Selection of the proper type of fume hood to use in a laboratory should be based upon two interrelated considerations:
 

1:The hood must allow the user to perform the work in a safe, efficient manner.

2. The need to reduce air conditioning cost.

The interior of the Penway`s hood resists the corrosive effects of chemicals. The hood under structure should provide for storage of the required chemicals for the work being done in the hood. The total cost of a hood is greatly affected by its exhaust air requirements. The annual cost of heating and cooling the air exhausted by the hood can be as high as the initial cost of the hood itself.
Choosing the proper hood type and sash configuration can significantly
reduce these costs.

High Performance Fume Hoods





Penway High-Performance/Low-Flow Fume Hoods

Compared to most traditional fume hoods, these high performance, low flow hoods are safer, have lower installation costs, and are up to 50% less expensive in operating costs. We have designed and installed fume hoods in labs around the world. 

Save Green with Environmentally-Conscious Fume Hood Models
High performance fume hoods has a series of design features to provide unsurpassed containment and operator protection:

1:Engineered baffle system provides proper air distribution
2:Constant air velocity (variable air volume) reduces energy use relative to sash position
3:Rounded corners at hood entrance reduce turbulence, improving efficiency
4:Aerodynamic sash pull
5:Containment trough with directional vanes and white Plascote finish adds  durability and chemical resistance
6:Cord pass-through lets sash fully close without appliance cords getting in the way
7:Lower entrance safety bar provides a personal safety barrier 880mm high viewing area
8:White ResChem interior with vapor-proof fluorescent light.
9:458mm vertical opening with keyed sash stop to access 685mm set-up position
10:Double-wall construction for installation of plumbing and electrical service fixtures.

Product Parameters

 

Type	EN or EU standard fume hood
Exhaust system	CAV exhaust system (Constant air volume) / VAV exhaust system
Exhaust fan	Inclined flow fan (The installation principle is the same as air conditioning) or Centrifugal fan
Exhaust air rate	1500-3500m3/h
Ventilation ducts	(φ250 or 315mm)PVC material, FPR, PP or other
Power	(Single-phase) 220V/50HZ or (Three-phase) 380V/50HZ
Air valve	Manual or electric or VAV air valve
Average wind speed	0.3-0.6m/s adjustalbe
Noise level	< 60dB(A)
Tops	12.7/16/19/mm thickness of Phenolic resin (Other: Epoxy resin, Ceramic etc)
Inner Liner	Using HPL physiochemical board to make for lining plate and the flow guide plate
Cabinet	1.0mm thick cold-rolled steel with 75μm epoxy resin powder coating, most chemical resistant
Size	1200/1500/1800*945*2400 mm (customizable)
Visual windows	Transparent tempered glass
Opening height	20-700 mm
Control panel	Touch, intelligent control panel (can control lights, sockets, exhaust fan etc), display wind speed
Gross weight	280-400 kg
Motor power	0.5-1.1KW
Luminance	>500LX
Lab accessories	Pegboard, sink, faucet, gas fitting, sockets, lab stools etc

Advantages of High Performance Chemical Fume Hoods:
1:Engineered to exhaust 50% less conditioned air from the laboratory
2:Designed to capture fumes while working in today's modern laboratories with varying factors such as lab traffic, fluctuating temperatures and interior hood loading
3:Fume capture and containment can be demonstrated with tracer gas testing
5:Standard, available for all new chemical fume hood installations
6:Quiet operation
7:Low airflow provides an ideal environment for working with powders and delicate work.

Low-flow/high-performance hoods use substantially less energy to operate over the life-time of the fume hood exhaust system. Visit Laboratory Fume Hood Energy Model to calculate your energy needs.


Penway has our own HVAC engineers to design the lab fume hood ventilation. From lab ventilation designs to construction, until system test and accept of work. Penway can provide one-stop service to customer.